CCNP Data Center 300-620 dumps updated, containing 208 latest topic exam questions and answers, reviewed, corrected, and actually verified by the leads4pass Cisco team to meet the CCNP Data Center 300-620 certification exam requirements!
Now! Download CCNP Data Center 300-620 dumps with PDF and VCE: https://www.leads4pass.com/300-620.html, practice completing CCNP Data Center 300-620 topic exam questions. 100% Guaranteed Success on Your CCNP Data Center 300-620 Exam!
Share part of the topic exam questions from CCNP Data Center 300-620 dumps
| From | Number of exam questions | Associated certifications | Last updated |
| leads4pass | 15 | CCNP Data Center | 300-620 DCACI dumps |
Topic Question 1:
Refer to the exhibit. An engineer configures communication between the EPGs in different tenants. Which action should be taken to create the subnet?
A. Change Scope to Shared between VRFs.
B. Leave Scope set to Private to VRF.
C. Add the L3Out for Route Profile value.
D. Change Scope to Advertised Externally.
Correct Answer: A
Topic Question 2:
Which components must be configured for the BGP Route Reflector policy to take effect?
A. spine fabric interface overrides and profiles
B. access policies and profiles
C. pod policy groups and profiles
D. leaf fabric interface overrides and profiles
Correct Answer: A
Topic Question 3:
A network engineer must back up the PRODUCTION tenant. The configuration backup should be stored on the APIC using a markup language and contain all secure information.
Which export policy must be used to meet this requirement?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: D
Topic Question 4:
An engineer wants to filter the System Faults page and view only the active faults that are present in the Cisco ACI fabric. Which two lifecycle stages must be selected for filtering? (Choose two.)
A. Raised
B. Retaining
C. Soaking, Clearing
D. Raised, Clearing
E. Soaking
Correct Answer: AD
Topic Question 5:
Refer to the exhibit. Which two configurations enable inter-VRF communication? (Choose two.)
A. Set the subnet scope to Shared Between VRFs.
B. Enable Advertise Externally under the subnet scope.
C. Export the contract and import it as a contract interface.
D. Change the contract scope to Tenant.
E. Change the subject scope to VRF.
Correct Answer: BC
Topic Question 6:
A RADIUS user resolves its role via the Cisco AV Pair. What object does the Cisco AV Pair resolve to?
A. tenant
B. security domain
C. primary Cisco APIC
D. managed object class
Correct Answer: D
Topic Question 7:
Which type of port is used for in-band management within ACI fabric?
A. spine switch port
B. APIC console port
C. leaf access port
D. management port
Correct Answer: C
Topic Question 8:
Refer to the exhibit. An engineer must implement the inter-tenant service graph. Which set of actions must be taken to accomplish this goal?
A. Define the contract in the provider tenant and export it to the consumer tenant. Define the L4-L7 device, service graph template, and ASA bridge domains in the provider tenant.
B. Define the contract in the provider tenant and export it to the consumer tenant. Define the L4-L7 device and service graph template in the provider tenant and the ASA bridge domains in the consumer tenant.
C. Define the contract in the provider tenant and export it to the provider tenant. Define the L4-L7 device and service graph template in the provider tenant and the ASA bridge domains in the consumer tenant.
D. Define the contract in the provider tenant and export it to the provider tenant. Define the L4-L7 device, service graph template, and ASA bridge domains in the consumer tenant.
Correct Answer: B
Topic Question 9:
Which two statements regarding ACI Multi-Site are true? (Choose two.)
A. The Multi-Site orchestrator must be directly attached to one ACI leaf.
B. Routers in the Inter-Site network must run OSPF, DHCP relay, and MP-BGP.
C. ACI Multi-Site is a solution that supports a dedicated APIC cluster per site.
D. ACI Multi-Site is a solution that allows one APIC cluster to manage multiple ACI sites.
E. The Inter-Site network routers should run OSPF to establish peering with the spines.
Correct Answer: DE
Topic Question 10:
In a Cisco ACI Multi-Site fabric, the Inter-Site BUM Traffic Allow option is enabled in a specific stretched bridge domain. What is used to forward BUM traffic to all endpoints in the same broadcast domain?
A. ingress replication on the spines in the source site
B. egress replication on the destination leaf switches
C. egress replication on the source leaf switches
D. ingress replication on the spines in the destination site
Correct Answer: D
Topic Question 11:
Refer to the exhibit. VM1 and VM2 are in Cisco ACI POD1 and communication takes place. Which event is triggered when VM2 is live migrated from POD1 to POD2?
A. Leaf 102 installs a bounce entry for VM2 pointing to the PTEP address of leaf 201.
B. Leaf 201 creates a tunnel with Leaf 102 because of the bounced traffic that is destined to VM2.
C. Spines from POD2 send an MP-BGP EVPN update to the leaves in POD1 about the new location of VM2.
D. An MP-BGP EVPN update is received by spines in POD1 announcing the reachability of VM2 via the proxy VTEP address of the spines in POD2.
Correct Answer: B
Topic Question 12:
A Solutions Architect is asked to design two data centers based on Cisco ACI technology that can extend L2/L3, VXLAN, and network policy across locations. ACI Multi-Pod has been selected. Which two requirements must be considered in this design? (Choose two.)
A. ACI underlay protocols, i.e. COOP, IS-IS, and MP-BGP, span across pods. Create QoS policies to make sure those protocols have higher priority.
B. A single APIC Cluster is required in a Multi-Pod design. It is important to place the APIC Controllers in different locations in order to maximize redundancy and reliability.
C. ACI Multi-Pod requires an IP Network supporting PIM-Bidir.
D. ACI Multi-Pod does not support Firewall Clusters across Pods. Firewall Clusters should always be local.
E. Multi-Pod requires multiple APIC Controller Clusters, one per pod. Make sure those clusters can communicate with each other through a highly available connection.
Correct Answer: AE
Topic Question 13:
Which class of ACI object is presented in this output?
A. Contract
B. Bridge Domain
C. Tenant
D. Endpoint
Correct Answer: A
Topic Question 14:
An engineer configures a Multi-Pod system with the default getaway residing outside of the ACI fabric for a bridge domain. Which setting should be configured to support this requirement?
A. disable Limit IP Learning to Subnet
B. disable IP Data-plane Learning
C. disable Unicast Routing
D. disable Advertise Host Routes
Correct Answer: D
Topic Question 15:
Refer to the exhibit. A Cisco APIC raises this fault when connectivity for EPG-3 is configured. Which action clears the fault?
A. Associate BD-3 to VRF-1.
B. Implement a domain for EPG-3.
C. Configure a subnet on BD-3.
D. Create BD-3 for EPG-3.
Correct Answer: D
…
leads4pass CCNP Data Center 300-620 dumps cover the complete CCNP Data Center 300-620 certification topic exam questions! You can experience some of the latest CCNP Data Center 300-620 dumps topic exam questions through the online practice, Help you experience the real scene in advance!
more importantly! Download CCNP Data Center 300-620 dumps with PDF and VCE: https://www.leads4pass.com/300-620.html, practice completing CCNP Data Center 300-620 topic exam questions. Helping you pass the CCNP Data Center 300-620 exam with ease!
